User's Manual

ThurayaIP Satellite Modem User Manual 17
WLAN SECURITY SCREEN
The WLAN Security screen allows you to configure WLAN security
parameters, including enabling/disabling Wired Equivalent Privacy
(WEP), hiding the SSID and setting Media Access Control (MAC) filters.
Access this screen by clicking the WLAN Security Settings link towards
the bottom of the WLAN Configuration Screen.
WLAN SSID Broadcast: Enable or Disable SSID broadcast.
Security (WEP): Enable or Disable security for Wired Equivalent Privacy
(WEP), a security protocol for the wireless local area network.
WLAN Key to Use: Select the active key--Key1 through Key4--from a pull
down menu. Note that in 128-bit key mode only Key1 is available.
64-bit WEP/128bit-WEP: Use this button to toggle between 64-bit and
128-bit WEP mode.
WLAN Key Fields, Key 1 through Key 4: In 64-bit WEP mode, enter a 10
character (0-9, A-F) key value in each of four text boxes. In 128-bit WEP
mode, enter a 26 character (0-9, A-F) key value in the Key1 text box.
Generate: Instead of manually entering a key value, you may press the
Generate button to automatically generate a key value.