User Manual

LAUNCH PAD -- QUICKSTART WIZARD
Desktop Icon
The Satellite IP Modem Launch Pad menu is displayed once
you complete the installation steps and click the Installation
Wizard Finish button with Start the Launch Pad enabled.
Alternately, the Launch Pad can be started by double-clicking
on the Satellite IP Modem desktop icon.
Choose View QuickStart Wizard from the Launch Pad menu. This option leads
you through the steps necessary to connect your Satellite IP Modem with the
Regional BGAN network. Note that you will need to follow the configuration
instructions supplied by your Service Provider (supplier of your SIM) to ensure that
you have the correct configuration information.
Launch Pad Screen
QUICKSTART WIZARD OVERVIEW
There are 12 basic steps to getting your Modem up and running:
 Step 1: Unpack the Satellite IP Modem
 Step 2: Unpack the Satellite IP Modem – Power
 Step 3: Connecting the Satellite IP Modem to your PC
 Step 4: Connecting Using USB, Ethernet or Bluetooth
 Step 5: GPS Location
 Step 6: Rough Pointing to Satellite
 Step 7: Rough Pointing to Satellite
 Step 8: Rough Pointing to the Satellite − Compass Direction
 Step 9: Rough Pointing to the Satellite – Antenna Angle
 Step 10: Fine Pointing to the Satellite
 Step 11: Fine Pointing to the Satellite
 Step 12: Exiting Pointing Mode
Regional BGAN Satellite IP Modem User Manual
5