User Manual

The UT consists of a User Device (UD) and User Equipment (UE). The User Device includes the
computing platforms and displays which will manage applications and end user interactions.
The User Equipment, which will be provided by Hughes, consists of
• a DVB-SH receiver for multicast reception via direct satellite path and indirect path via terrestrial
repeaters. It is located inside the Trunk Mount Gateway (TMG),
• a GMR-1 transceiver for satellite interactive services. It is also located inside the TMG,
• an antenna assembly that includes a GPS receiver.
User Equipment interfaces to the User Device over standard networking interfaces (USB, Ethernet) and
are integrated at the service layer in the User Device.
ICO MCAP
TMG
Ethernet
USB
User Device
12V
Ignition
sense
GND
Antenna
Cables
Antenna
Assembly
Figure 2 System Overview of UE
1.2 DELIVERABLES
The deliverable for ICO MCAP UE consists of two boxes:
A) ICO MCAP UE TMG box contains:
1) One Trunk Mount Gateway with mounting brackets and test SIM installed
2) 12V Power cable package (3 cables)
3) Antenna RF cable package (4 cables)
4) Installation guide (this document)
B) ICO MCAP UE antenna assembly box contains:
1) External roof mount antenna assembly with magnetic mounts
1.3 POWER CONNECTOR
The power connector is the connection from the power supply (vehicle battery or some other 12 VDC
power source) to the TMG. There power cable has 3 lines: +12VDC power line (RED), +12V ignition
sense line (YELLOW) and a Ground line (BLACK).