Installation Manual

1027144–0001 Draft – Revision D.01 6–10 Installing ODUs
RT installation
The antenna mount (HNS 1024668–0025) consists of a mast
interface and permanent mast clamp, as shown in figure 6-8.
Follow the steps below to install the antenna mount.
Figure 6-8 Antenna mount
Antenna
mount
hb037
Temporary
installation collar
Mast
Permanent
mast clamp
Mast
interface
1. Determine which side of the permanent mast clamp to use:
hb069
Permanent mast clamp
Use this side against the mast if the
mast outside diameter is
.
less than
3.5 inches (8.9 centimeters)
Use this side against the mast if the
mast outside diameter is 3.5 inches
(8.9 centimeters) or larger.
6.5
Installing the
antenna mount