Installation Manual

1027144–0001 Draft – Revision D.01
Installing ODUs 6–13
RT installation
2. Rotate the antenna approximately 45° away from the HT
until the antenna bracket reliefs (curved indentations) are
aligned with the four nuts on the mast interface, as shown in
figure 6-11.
Figure 6-11 Rotating the antenna so the antenna
bracket can be placed against the mast interface
Line of sight to HT
45
rt010
Locking nut
(1 of 4)
Mast
interface
Relief (1of 4)
Relief
Close-up view:
Antenna bracket reliefs
3. Press the antenna against the mast interface.