User's Manual

1027144–0001 Draft – Revision D.01 6–6 Installing ODUs
RT installation
Important: To correctly install the antenna mount, read and
carefully follow all instructions in sections 6.4 through 6.8.
The temporary installation collar (HNS 1024668–0022; figure 6-4)
supports the antenna mount and ODU during installation (as
shown in figure 6-3).
Figure 6-4 Temporary installation collar
hb036
Temporary
installation collar
Temporary
mast clamp
Mast
Before you install the temporary installation collar:
1. Refer to the illustration below to determine which side of
the temporary mast clamp to use:
hb065
Temporary mast clamp
Use this side against the mast if the
mast outside diameter is
.
less than
3.5 inches (8.9 centimeters)
Use this side against the mast if the
mast outside diameter is 3.5 inches
(8.9 centimeters) or larger.
6.4
Installing the
temporary collar