User's Manual

1027144–0001 Draft – Revision D.01 Index-1
Index has not been updated
Index
A
Abbreviations (identified), A- 1
Access, buildings and equipment locations, 2–2
Acronyms (identified), A- 1
Adding SSIs, 10–2
Adjuster (for azimuth and elevation), 2–5
Adjusters (to adjust azimuth or elevation), 4–6
installing azimuth adjuster, 4–16
installing elevation adjuster, 4–19
Antenna
adjusting azimuth, 4–15
adjusting elevation, 4–18
attaching to the antenna mount, 4–13
pointing
final commissioning adjustments, 7–5
initial azimuth adjustment, 4–15
initial elevation adjustment, 4–18
troubleshooting, 9–4
voltage indications, 7–7
replacing, 10–7
repointing, 7–8
Antenna mount
collar, 4–6
installing, 4–7
installing, 4–11
torque wrench, 4–5
ATM. See OC3c–ATM SSI
Attenuator
installing, 4–22
replacing the antenna, 10–7
replacing transceiver, 10–5
types, 4–22
Azimuth
adjusting, 4–15
explained and illustrated, 4–15
Azimuth/elevation adjuster, 2–5
Azimuth/elevation adjusters. See Adjusters (to
adjust azimuth or elevation)
B
Ballast. See Concrete blocks
Bend radius (IFL cable), 5–8, 5–23
Blocks. See Concrete blocks (ballast)
Buttons on CCM, 6–37
functions, 6–38
C
Cable length
DS3–ATM, 6–26
DS3–TDM SSI, 6–25
DS3–Transparent SSI, 6–27
IFL, 5–5
Quad–DS1 SSI, 6–24
Universal–DS1 SSI, 6–26
Canadian Interference–Causing Equipment
Regulations, B–2, B–3
Canadian Standards Association, B–2, B–3
CCM
button functions, 6–38
buttons on front panel, 6–37
functions, 6–22
installing, 6–22
LEDs, indications, explained, 6–23
power–on test, 6–39
replacing, 10–12
status, 6–41
SUDS, 6–39
troubleshooting, 9–2
Channel and control module. See CCM
Chassis. See IDU chassis
Checklist. See Task checklist
Commissioning
pointing the antenna, 7–5
prerequisites, 2–6, 7–3
procedure, 7–4
RT ESN, 7–3
task checklist, 7–2
Components to be installed, 1–3
Concrete blocks (ballast), 3–11
arrangement on mount, 3–12
Connections
checking, 6–39
weatherproofing, 8–2
Corrugated metal roof, 3–12