User's Manual

1027144–0001 Draft – Revision D.01
Commissioning the RT 7–5
RT installation
When the CCM/ IDU is powered up or reset:
• SUDS run automatically.
• When SUDS are completed, the CCM LCD displays a
SUDS Completed message.
• The LCD then displays:
Initializing
Press Enter for Menu
To access the CCM LCD Main Menu, press the ENTER button on
the CCM front panel while the Initializing screen is displayed.
This puts the IDU into diagnostic mode. The LCD shows the Main
Menu:
Main Menu
Status
Note: After the CCM downloads its software and is operational
(when it displays RT Enabled), you can access the Main Menu by
pressing Enter.
Accessing the LCD
Main Menu