User's Manual

1027144–0001 Draft – Revision D.01
Commissioning the RT 7–3
RT installation
Connect the IFL cable to the CCM (IDU):
1. Go to the IDU location.
2. Make sure power to the IDU is off (or disconnected).
3. Using a 90° adapter, connect the IFL (N connector) to the
CCM IFL interface, as shown in figure 7-1.
Figure 7-1 Connecting the IFL cable
1
2
3
4
5
TM
BROADBAND
ENTER
RT CCM
rt043
CCM
IDU
IFL
interface
IFL
N connector
90 adapter°
4. Power on the IDU.
7.2
Connecting the IFL
to the CCM (IDU)