User's Manual

1027145–0001 Revision D 5–8 Installing IFL cables
Hub installation
All AIReach Broadband IFL cables must connect to a
grounded lightning arrestor (provided by HNS) at the building
penetration point, as shown in figure 5-1 (page 5–3) and
explained in this section. A single lightning arrestor can be used
for IFL cables for up to eight HTs.
WARNING
To help avoid death, injury, or damage from
a lightning strike, you must install a
lightning arrestor where the IFL enters the
building.
Figure 5-4 identifies the hub lightning arrestor components.
Figure 5-4 Hub lightning arrestor components
Restraining
fitting
Ground bar
RF arrestor
hb077
Go to the roof to install the lightning arrestor.
5.7
Installing the hub
lightning arrestor