User's Manual
Table Of Contents
1027145–0001 Revision D Installing indoor hub equipment 6–41Hub installation
5. Press Enter to show the status of the selected SSI:
SSI 3
OK
The possible status conditions for CCMs, SSIs, and the
ODU are:
OK
Degraded
Failed
Unknown
(as explained on page 6–39)
Check the status of each installed SSI.
The RT must be operational before you can check the ODU status.
Check the ODU status (later) as part of the HT commissioning
process, as explained on page 7–7.
The AIReach Broadband hub LAN uses a Cisco 2611 (DC)
modular router and a Cisco 1924 (DC) Ethernet hub switch, which
connects to the router.
For installation and configuration information, refer to the Cisco
documentation. (The router must be configured for EMS–hub
communication.)
For detailed specifications, see the Hub and Remote Terminal Site
Preparation Guide or the Cisco documentation.
6.11
Hub LAN router and
LAN hub