User's Manual

10271450001 Revision D 6–34 Installing indoor hub equipment Hub installation
The text display (LCD) on the CCM front panel (figure 6-23):
Shows CCM startup diagnostics (SUDS) tests as they occur
Shows the system boot up sequence
Shows the software loading sequence
Indicates the status and operational state of system
components
Provides functions necessary for commissioning the HT
You will use the LCD (liquid crystal display) and buttons on the
CCM front panel to conduct the test and checks described in
sections 6.9 and 6.10.
Figure 6-23 CCM front panel LCD
hb104
LCD
TM
BROADBAND
ENTER
Main Menu
Status
When the CCM/ IDU is powered up or reset:
SUDS run automatically.
When SUDS are completed, the CCM LCD displays a
SUDS Completed message.
The LCD then displays:
Initializing
Press Enter for Menu
To access the CCM LCD Main Menu, press the ENTER button on
the CCM front panel while the Initializing screen is displayed.
This puts the IDU into diagnostic mode. The LCD shows the Main
Menu:
Main Menu
Status
Note: After the CCM downloads its software and is operational,
you can access the Main Menu by pressing Enter.
6.8
Front panel LCD
operation
Accessing the LCD
Main Menu