User's Manual
Table Of Contents
- Title page
- Contents
- About this manual
- Safety information
- Ch 1 - Installation summary
- Ch 2 - Prerequisites
- Ch 3 - Indoor equipment
- Ch 4 - Installing IFL cables
- Ch. 5 - Installing mast mounts
- Ch 6 - Installing ODUs
- Ch 7 - Commissioning the RT
- Ch 8 - Final steps
- Ch 9 - Troubleshooting
- Ch 10 - Maintenance
- App A - Acronyms
- App B - Standards compliance
- App C - Terminating the IFL cable
- Index
RT INSTALLATION
1027144–0001 Revision D
Installing ODUs 6–1
RT installation
Chapter 6
Installing ODUs
This chapter explains how to install RT ODUs. It includes:
• Introduction – page 6–2
• Transporting the ODU to the roof – page 6–4
• Preparing to install the antenna mount – page 6–5
• Installing the antenna mount – page 6–8
• Attaching the antenna to the mount – page 6–10
• Adjusting the antenna azimuth (coarse adjustment) –
page 6–14
• Adjusting the antenna elevation (coarse adjustment) –
page 6–17
• Installing a mechanical attenuator – page 6–19
• Attaching the transceiver to the antenna – page 6–21
• Grounding the ODU – page 6–23
• Connecting the IFL to the ODU – page 6–25
For ODU standards compliance information, see appendix B
(page B–2).
For ODU location requirements, see page 5–3.