User's Manual
Table Of Contents
- Title page
- Contents
- About this manual
- Safety information
- Ch 1 - Installation summary
- Ch 2 - Prerequisites
- Ch 3 - Indoor equipment
- Ch 4 - Installing IFL cables
- Ch. 5 - Installing mast mounts
- Ch 6 - Installing ODUs
- Ch 7 - Commissioning the RT
- Ch 8 - Final steps
- Ch 9 - Troubleshooting
- Ch 10 - Maintenance
- App A - Acronyms
- App B - Standards compliance
- App C - Terminating the IFL cable
- Index
1027144–0001 Revision D 7–4 Commissioning the RT
RT installation
This section describes how to use the LCD and buttons on the
CCM front panel (figure 7-2). You need to use the LCD to
commission the RT.
The LCD:
• Shows CCM startup diagnostics (SUDS) tests as they occur
• Shows the system boot up sequence
• Shows the software loading sequence
• Indicates the status and operational state of system
components
• Provides functions necessary for commissioning the RT
Figure 7-2 CCM front panel LCD
TM
BROADBAND
Main Menu
Install
ENTERPREVNEXT
T0009049
LCD
7.3
Front panel LCD
operation