User's Manual
Table Of Contents
- Title page
- Contents
- About this manual
- Safety information
- Ch 1 - Installation summary
- Ch 2 - Prerequisites
- Ch 3 - Installing mast mounts
- Ch 4 - Installing ODUs
- Ch 5 - Installing IFL cables
- Ch 6 - Indoor equipment
- Ch 7 - Commissioning HTs
- Ch 8 - Final steps
- Ch 9 - Troubleshooting
- Ch 10 - Maintenance
- App A - Acronyms
- App B - Standards compliance
- App C - Terminating IFL cables
- Index
HUB INSTALLATION
1027145–0001 Revision E Installing ODUs 4–1Hub installation
Chapter 4
Installing ODUs
This chapter explains how to install ODUs at the hub.
It includes:
• Introduction – page 4–2
• Transporting the ODU – page 4–5
• Determining the HT alignment direction – page 4–6
• Installing the antenna mount – page 4–13
• Attaching the antenna to the mount – page 4–15
• Adjusting the antenna azimuth – page 4–18
• Adjusting the antenna elevation – page 4–20
• Making fine adjustments – page 4–22
• Attaching the transceiver to the antenna – page 4–23
• Grounding the ODU – page 4–25
For ODU standards compliance information, see appendix B
(page B–2).
For ODU location requirements, see page 3–3.