User's Manual

1027145–0001 Revision E Index-5
Replacing
antenna, 10–6
CCM, 10–10
faulty components, 9–6
IDU chassis, 10–8
IFL, 10–12
ODU, 10–3
SSIs, 10–11
transceiver, 10–4
RF arrestor, 5–9, 5–14
Roof types, 3–5
corrugated metal, 3–11
Router (for hub LAN), 1–2, 6–2, 6–6
configuration, 7–2
description, 6–39
S
Safety information, ix
rack mounting, 6–8
Sectors, definition and terminology, 4–9
Service loops, 5–7
Service–specific interface. See SSI
Site Data Record, 2–1
Site preparation, vii
Slots, IDU chassis
numbering of, 6–7
where CCM and SSIs are installed, 6–26,
6–28, 6–29, 7–8
Software downloading (CCM), 7–6
Spin–stripping tool (for IFL cable), C–3
SSIs, 7–2
adding, 10–2
DS3–TDM, 6–28
DS3–transparent, 6–29
function, 6–28
hot swapping, 10–2
installing, 6–30
chassis slots, 6–29, 10–2
LEDs, 6–31
moving, 10–2
numbering, 7–8
OC3c–ATM, 6–29
replacing, 10–11
status, 7–8
types, 6–28
Standards compliance, B–1
Startup diagnostics. See SUDS
State, 7–6
Status of CCM, SSIs, or ODU, 7–7
SUDS, 6–35, 6–38, 7–4
failure indication, 6–39
test and display sequence, 6–35, 6–38
SUDS Completed message, 7–4
Summary of installation, 1–3
Switch (for hub LAN), description, 6–39
T
Task checklist, 1–3
Temperature, IDU chassis, 6–8
Terminating the IFL cable, C–1
Test set, 2–5
Testing
DS1 test, 7–11
DS3 test, 7–13
fractional DS1 test, 7–15
fractional DS3 test, 7–17
HT to RT connections, 7–11
IFL cable and connectors, 5–15
Tools required for installation, 2–3
Torque
antenna mount, 4–19, 4–21
rack safety bolts, 6–4
Torque wrench for antenna mount, 4–5
Transceiver
attaching to the antenna, 4–23
replacing, 10–4
Transmission equipment, 1–3
Troubleshooting, 9–1
CCM, 9–2
HT Disabled message, 9–6
LAN connection, 9–4
True north, 4–6
U
Underwriters Laboratories (UL), B–2, B–3
W
Warnings (safety), explained, ix
Weatherproofing, 5–14, 8–2
Wrist strap (ESD), 6–26, 6–30