User's Manual

ManualsBrandsHuges Hi-Tech ManualsAudio EquipmentBluetooth Headset

332A Bluetooth headset user guide

Bluetooth headset features

1) Talk Key & Headset indicator light -

To accept/end call; blue/red colors indicating the status

of the headset.

2, 3) Volume control button up and down -

Adjust the speaker volume (2 dots volume up, one dot

volume down)

4) Microphone -

Voice input for outgoing audio.

5) Ear hook -

Wear the headset on ear.

6) Ear hook –socket - (Back of the headset)

Socket to connect the ear hook to headset

7) Speaker – (Back of the headset)

Listen for incoming audio.

8) Charging port – (Back of the headset)

Plug for charging the battery.

Introduction

This bluetooth headset is a light weight wireless system utilizing bluetooth wireless technology. The headset contains a

microphone and a speaker; it’s for hands free communications with mobile phones. The power is provided by integral

rechargeable battery.

Any device that you want to use with this Bluetooth headset must be compatible with Bluetooth technology version 1.1 and

support the product and make sure that you:

1. Fully charge headset over night before you use it the first time.

2. Pair the headset with your Bluetooth phone or other devices before you start making calls.

What's in the package?

1. One bluetooth headset. 2. One adaptor 3. One user guide

2 3

Summary of content (6 pages)

PAGE 1
332A Bluetooth headset user guide Bluetooth headset features 2 7 3 6 5 4 4 1 8 1) Talk Key & Headset indicator light To accept/end call; blue/red colors indicating the status of the headset. 4) Microphone Voice input for outgoing audio. 6) Ear hook –socket - (Back of the headset) Socket to connect the ear hook to headset 8) Charging port – (Back of the headset) Plug for charging the battery.
PAGE 2
Choose right or left ear wearing style Headset can be worn on either ear by adjust the ear hook. Note: The ear hook can plug into the socket by either side of the headset. Please see below. Important: Please follow the below picture arrow angle to insert the ear hook, avoid vertical insert. Adjustable hook’s angle for your ear The angle of headset’s hook can be adjusted that to fit your ear. Note: The hook includes the function that the hook can be adjusted. You can use it to fix your ear.
PAGE 3
the headset's ID, and process with future use. 3. Pairing the headset to the phone Before you can pair your headset you need to put it into pairing mode. Note: Pairing must be done every time while the headset establishes a link with a different Bluetooth phone. Pairing mode can only be entered from the power OFF state. During pairing, it is recommended that the headset and phone distance is as close as possible with no solid objects in between.
PAGE 4
. A short tone will prompt you and you can speak the voice “tag” name as entered in the phone’s voice dial phone book. 5. The phone automatically dials your selection, and you see the details of the call on the phone screen. 6. When connected, you are free to communicate normally by the headset. Note: Please refer to the phone user guide for instructions on storing voice tags. Ending a call from the headset To end a call; when wearing the headset press the headset's Talk button.
PAGE 5
Pairing success Active / on call Blue LED flash once every 3 sec. Blue LED flash 4 times every 3 sec. Audio indicator chart Headset state Volume button Incoming call Low battery Initiate voice dial Audio indication Repeated single tone when the button either lower or upper is pressed. Ring tone DO-LU-DO-LU-DO tone every 40 sec. the headset rings as the cell phone default sound.
PAGE 6
Warranty and parts replacement Battery: This headset is equipped with a lithium polymer rechargeable battery. Replacement or service must be done at a qualified service center or returned to the manufacturer. Use only the battery supplied. Use only the supplied and approved AC charger. We warrant this product against all defects in material and workmanship for a period of one year from the date of original purchase.