User's Manual

ManualsBrandsHuges Hi-Tech ManualsAudio EquipmentBluetooth Headset

222 Bluetooth headset user guide v1.0

Introduction

This Bluetooth headset is a wireless device utilizing Bluetooth wireless technology. The headset

contains a microphone and a speaker. It provides hands-free communication using mobile phones,

and the power is provided by either a rechargeable or an Alkaline AAA battery.

Any device that you want to use with this Bluetooth headset must be compatible with Bluetooth

technology version 1.1. The device must also support the same profiles as the headset. Make

sure that you pair the headset with your Bluetooth phone or other devices before you start using it.

Features

1. Battery Cover

2. LED Display

3. Microphone

4. Talk/Volume Up Button

5. Talk/Volume Down Button

6. Receiver

What's in the package?

1. One Bluetooth headset with ear hook. 2. One AAA Alkaline battery

3. One user guide 4. One hanging strap

Wearing preference

Headset can be worn on either ear by adjusting the ear hook. You can adjust it by inserting the

ear hook from either side of the headset.

Preparing to use your Bluetooth headset

1. Putting the battery in the headset.

A. Slide the battery cover upward and open it.

B. Put the battery in the headset

C. Close the battery cover and slide it downward.

2. Pairing procedure

Before using the headset for the first time, you must pair the headset with a Bluetooth phone.

If this is the only headset you will use with the cell phone, no further pairing is necessary.

Make sure that the headset is switched off before pairing.

A. Follow the instruction of the user guide of the cell phone to turn on the Bluetooth

feature.

B. Press and hold the Volume Up button (bigger button) on the headset for 7 seconds until

the Red and Blue LEDs alternate rapidly, which indicates that the headset is in pairing

mode.

C. Perform a Bluetooth device discovery on the cell phone. (It might take several seconds.

Also, the closer you put the two devices together, the better.)

D. The phone's display will advise that it has found 222 and ask you to confirm that you

Summary of content (4 pages)

PAGE 1
222 Bluetooth headset user guide v1.0 Introduction This Bluetooth headset is a wireless device utilizing Bluetooth wireless technology. The headset contains a microphone and a speaker. It provides hands-free communication using mobile phones, and the power is provided by either a rechargeable or an Alkaline AAA battery. Any device that you want to use with this Bluetooth headset must be compatible with Bluetooth technology version 1.1. The device must also support the same profiles as the headset.
PAGE 2
E. F. want to pair with it. Confirm this. Enter the passkey 1234 when your phone prompts you, and the phone will start to pair with the headset. Your phone will advise that pairing has been successful, and the LED on your headset will change state to show that it’s now in standby mode. The blue LED will flash once or three times every 5 seconds depending on the profile your cell phone supports. If the pairing fails, the blue and red LEDs keep alternating rapidly for about 2 minute.
PAGE 3
Last number redial When the headset is in standby condition (not in conversation), press the Volume Down key for 5 seconds, and your phone will redial the last number that you called. Note: This function only works on Bluetooth phones that support Handsfree profile; therefore you need to make sure that the phone and the headset are linked with Handsfree profile. Call transfer When in conversation, you may transfer the voice from headset to phone or from phone to headset.
PAGE 4
Bluetooth headset specification Bluetooth compliance Bluetooth 1.1 with headset profile Maximum distance 30 Feet (10 meters) Weight of headset 15g without battery (26g with a AAA battery) Typical standby time up to 1 month (using a Duracell Alkaline AAA battery) Typical talk time up to 10 hours Battery type Alkaline or rechargeable AAA battery NOTE: Talk time and standby time are varied according to different mobile phones. Caution Risk of explosion if battery is replaced by an incorrect type.