User's Manual

What's in the package?

1. One bluetooth headset. 2. One adaptor

3. One bluetooth audio gateway 4. One hanging string

5. One user guide

Choose right or left ear wearing style

Headset can be worn on either ear by adjust the ear hook.

Note: The ear hook can plug into the socket by either side of the headset. Please see below.

Important: Please follow the below picture arrow angle to insert the ear hook, avoid vertical insert.

Adjustable hook’s angle for your ear

The angle of headset’s hook can be adjusted that to fit your ear.

Note: The hook includes the function that the hook can be adjusted. You can use it to fix your ear. Please see

below.

Important: Please be careful when you are adjusting the hook’s angle. Do not force it too much which to avoid

it getting any damages happened.

Prepare to use your Bluetooth headset

1. Charging and battery time

Before use your headset, you need to fully charge the batteries of headset and audio gateway.

NOTE: When the headset and audio gateway are under charging, headset’s power stays on “OFF” mode.

You’ll need to turn “ON” the headset to use after the charging.

Important: The headset’s power adaptor’s hole is bigger than the audio gateway; make sure you plug

the bigger adaptor’s connector to headset, while the smaller to audio gateway.

A. Connect the adaptor into an electrical outlet.

B. Plug the adaptor's connector into charging port.

C. While charging, the blue indicator light will stay solid on, when charging is completed, the light will be off.

Then you can take the adaptor's connector out from the headset and disconnect the adaptor from the

electrical outlet.

D. Charging time is about 2.5-3 hours.

When charging the headset please follow the arrow angle to insert the adaptor’s connector to headset, avoid

vertical insert

Note: The ear hook socket port and the power charging port is the same, it means you can either use

one port to insert the ear hook, while the other port to charging the battery.

2. Linking the headset to the audio gateway (Pairing)

Before you use your headset for the first time, you must pair the headset to audio gateway. The Bluetooth

connection between the headset and your audio gateway can be established by setting up a paired link. With

a paired link, the audio gateway remembers the headset's ID, and process with future use.