Owner's Manual

A
B
6551 Cen
Centerville O
M
ADE IN CHINA
CLOSE
OPEN
$$$/5
9
$$$/5
9
$$$/5
9
CLOSE
OPEN
22
21
24
24
23
7
5
Lights & Sound (L&S) Assembly:
Assembly hardware is located in the parts bag with
the product.
1. Locate the L&S (21) on the Fork Stem (7) with
(supplied)
Ba ery Replacement:
Ba eries: DC 1.5V, AAA (included). The unit requires 3 ba eries.
1. Open the door on the rear of the unit.
2. Loosen the ba ery compartment cover screw to remove the cover.
3. Insert ba eries in the orienta on shown inside the compartment.
4. Re-install the compartment cover and  ghten the screw.
Remove Pull
Tab for ba ery
opera on
control bu ons toward the rider.
2. Align the holes in the stem with those in the L&S.
3. Insert and  ghten the Screws (22) and Cap Nuts (23) using the tool supplied.
4. Ensure hardware is secure so that it will not come loose.
5. Be careful not to over- ghten the hardware. This can damage the L&S and strip
the threads in the hardware. Recommended torque is 88in-lbs (10Nm).
6. Snap the front and back covers (24) over the installed hardware.