Owner's Manual

4
No. Descrip on No. Descrip on
1 Frame 13 Pedal, Le
2 Seat 14 Axle
3 Screw (x2) 15 Washer (x4)
4 Washer (x4) 16 Rear Wheel (x2)
5 Nut (x2) 17 Locking Cap
6 Fender 18 Plas c Bin
7 Fork 19 Screw
8 Front Wheel 20 Lock Bu on
9 Screw (x2) 21 Lights & Sound Unit
10 Washer (x2) 22 Screw (x2)
11 Nut (x2) 23 Cap Nut (x2)
12 Pedal, Right 24 Covers
Assembly
1. Assemble Seat (2) to Frame (1) as shown in Assembly View
2. Insert Screws (3) and Washers (4) into Seat and through Frame.
3. insert Washers (4) and Nuts (5) onto Screws and  ghten securely.
To Unfold the Product:
1. Push the lock bu on (20) located on the right side of the unit, under the seat. This
releases the folding mechanism spring-loaded latch.
2. Pull the rear axle away from the front axle un l the unit starts to unfold.
3. Gently push down on the seat un l the folding mechanism latches into place.
4. Ensure the folding mechanism is latched by gently pulling upward on the seat.
To Fold the Product:
1. Push the lock bu on (20) located on the right side of the unit, under the seat. This
releases the folding mechanism spring-loaded latch.
2. Gently li on the seat un l the unit starts to fold.
3. Push the front and rear axles together un l the folding mechanism latches into
the folded posi on.
4. Ensure the folding mechanism is latched by gently pushing downward on the seat.