Instructions / Assembly

Owner’s Bicycle Identi cation Record

To determine the correct size of bicycle for the rider:

• Straddle the assembled bicycle with feet shoulder width

apart and  at on the ground.

• There must be at least 1” (2.5 cm) of clearance



between the highest part of the top tube



and the

crotch of the rider with tires properly in ated.

• The minimum leg-length for the rider is the highest

part of the top tube plus 1” (2.5 cm)



Fitting the Rider to the Bicycle

NOTE: This information is only available on the

bicycle itself.

Each bicycle has a Recovery Code stamped into the

frame. The Recovery Code



can be found on the

bottom of the crank housing as shown.

Write this number below to keep it for future refer-

ence.

If the bicycle is stolen, give this number and a de-

scription of the bicycle to the police. This will help

them  nd the bicycle.

Recovery Code:

Purchase Date:

Model Name:

NOTE: See Assembly sections for Seat adjustment.

• Adjust the seat height so that you can put the heel of one foot on a pedal with leg

extended straight

- and so the opposite foot can reach the ground with tip of foot

This will give your knees a slight bend when pedalling with the ball of the foot.

Introduction