User Manual

ManualsBrandsHuffy ManualsElectric BikesEverett Women's Comfort eBike w/25 mi Max Operating Range & 20 mph Max Speed - Matte Silver

[ In the US and Canada]

PLEASE

BEFORE RETURNING TO STORE:

Contact Huﬀ y Customer Service.

We are glad to assist you with any parts or

assembly problems you might have!

VEUILLEZ NOTER : AVANT DE

RETOURNER AU MAGASIN :

Communiquez avec le service à la

clientèle de Huﬀ y.

Nous vous aiderons

volontiers avec tout problème concernant les

pièces ou le montage!

For Fast Customer Service:

Pour un Service à la clientèle rapide :

www.huﬀ ybikes.com/contact

To Order Parts (US):

Pour obtenir des pièces (CANADA) :

www.huﬀ ybikes.com/parts

OR TEL: 1 800 872 2453 (US)

OU appelez le 1 800 872 2453 (CANADA)

For e-mail: www.huﬀ ybikes.com/contact

Pour communiquer par courriel : huﬀ ycanada@huﬀ y.com

[ MÉXICO ]

ANTES DE DEVOLVER EL

PRODUCTO A LA TIENDA:

Comuníquese Con Servicio

Al Cliente De Huﬀ y.

Nos

Complace Ayudarlo Con Cualquier

Parte O Problema De Ensamblado

Que Pudiera Tener.

Para obtener Servicio al cliente

rápido, visite:

www.huﬀ ybikes.com/

O LLAME AL TEL: 800 1 HUFFY 1

(800 1 48339 1)

(Mexico only)

Para comunicarse por correo electrónico:

servicio.mexico@huﬀ y.com

www.huﬀ ybikes.com/home/globalcontact/

for current contact information / para obtener la información de contacto actual /

pour les informations de contact actuelles

This manual contains important safety, assembly,

operation and maintenance information.

Please read and fully understand this manual before

operation.

Save this manual for future reference.

Always wear approved helmet and safety equipment when

using this product.

See back page for Customer Service Information

Owner’s Manual

for

36-volt e-Bike

H-eBike-Comf EN 03-16-20 m0709

Date Code Label

Here

NOTE: Models with Display please see included manual

KD58C-LCD

Summary of content (18 pages)

PAGE 1
H-eBike-Comf EN 03-16-20 m0709 [ In the US and Canada] PLEASE BEFORE RETURNING TO STORE: Contact Huﬀy Customer Service. Date Code Label Here EN Owner’s Manual for 36-volt e-Bike We are glad to assist you with any parts or assembly problems you might have! ~ VEUILLEZ NOTER : AVANT DE RETOURNER AU MAGASIN : Communiquez avec le service à la clientèle de Huﬀy. Nous vous aiderons Complace Ayudarlo Con Cualquier Parte O Problema De Ensamblado Que Pudiera Tener.
PAGE 2
Owner’s Manual Index Safety and Warnings ...........................................................................................2-6 Bike ID and Sizing ......................................................................................................7 Parts and Assembly ..............................................................................................8-18 Operating your e-Bike ..................................................................................... 19-20 Shift System.........
PAGE 3
e-Bikes Introduction This “Class 1” E Bike complies with Federal Governments guidelines, with regard to total watts and top speed. This product does not conform to Federal Motor Vehicles Standards and Is not intended for operation on public streets, roads or highways. Serious injury can result from the unsafe operations of this vehicle. Always obey State and Local Laws when using this product. This product is not designed to be jumped.
PAGE 4
Troubleshooting Failure of the rider to obey the following Safety Warnings can result in serious injury or death. Check local laws governing the use of electrical vehicles. • ADULT RIDERS ONLY. • DO NOT USE THE VEHICLE IN AN UNSAFE MANNER OR AT AN UNSAFE SPEED. Not intended for jumps - this can damage the product. • CHOKING HAZARD: Small parts, adult assembly required. • Before using this product, fully understand the controls and safety issues.
PAGE 5
WARNING - TO AVOID SERIOUS INJURY: Do not leave batteries unused for extended periods of time, either in the product or in storage. When a battery has been unused for 6 months, check the charge status and charge or dispose of the battery as appropriate. STORAGE: • • • • • • Charge or discharge the battery to approximately 50% of capacity before storage. Charge the battery to approximately 50% of capacity at least once every six months. Remove the battery and store it separately from the product.
PAGE 6
The following safety hazards may result in serious injury or death to the user of the vehicle: • Battery Charger for Indoor use only. Use of a battery or charger other than the supplied rechargeable battery and charger may cause a fire or explosion. Only use the supplied rechargeable battery (or lead-acid or lithium suitable replacement) and charger with the vehicle. • Using the rechargeable battery and charger for any other product may result in overheating, fire or explosion.
PAGE 7
Maintenance Maintenance: Frequently check the bearings of the bicycle. Have a bicycle service shop lubricate the bearings once a year or any time they do not pass the following tests: Headset Bearings: The fork should turn freely and smoothly at all times. With the front wheel off the ground, you should not be able to move the fork up, down, or side-to-side in the head tube. Crank Bearings: The crank should turn freely and smoothly at all times and the front sprockets should not be loose on the crank.
PAGE 8
Lubrication Maintenance 10 26 28 13 Parts Assembly 29 WARNING: • Do not over lubricate. If oil gets on the wheel rims or the brake shoes, it will reduce brake performance and a longer distance to stop the bicycle will be necessary. Injury to the rider or to others can occur. • The chain can throw excess oil onto the wheel rim. Wipe excess oil off the chain. • Keep all oil off the surfaces of the pedals where your feet rest.
PAGE 9
Tire and Tube Installation STEP 1 - REMOVE EXISTING TIRE AND TUBE: 28 Kickstand (not shown - styles vary) 32 Brake Hand Levers Seat Seat Reflector 14 15 Grip Set 11 Right Shift Lever (styles may vary) Front Brake Disc/Caliper 10 13 Axle Nut (x4) 9 12 Tube (x2) Tire (x2) 6 Wheel Retainer (x2) Front Wheel Assembly 5 8 Fork 4 7 Stem Battery Pack and Mount A 3 E 2 A Frame C 1 B Parts Assembly Chain Guard 31 29 27 28 26 25 24 22 23 21 20 19 18 17 No.
PAGE 10
This Owner’s Manual may be made for several different style products. • Some illustrations may vary slightly from the actual product. • Follow instructions completely. • If the product has any parts that are not described in this manual, look for separate “Special Instructions” that are supplied with the unit. • All features, components and accessories are not included on all models. • Use the Index page to locate specific sections of this manual.
PAGE 11
Installing the Front Wheel WARNINGS: Maintenance fig A F G C E B A NOTE: If any hardware is already attached, remove and set aside. MOUNTING FENDER: 1. Insert Fender up into Fork as shown. 2. Install Front Light and Mounting Bolt through Fork and Fender Tab . 3. Install Nut securely. A C D BRAKE ADJUSTMENT (see fig-A): 1. Loosen the Cable Clamp Bolt . 2. Push the Brake Arm toward the Adjusting Barrel (this applies the brake). 3.
PAGE 12
e-Bikes Maintenance: Assembly WARNINGS: • To prevent steering system damage and possible loss of control, the “MIN-IN” (minimum insertion) mark on the stem must be below the top of the Fork Locknut . • The Front Brake (if equipped) must be positioned in FRONT of the Fork. • Ensure the Fork is pointing FORWARD before proceeding. • Do not over tighten the stem bolt. Over tightening the stem bolt can damage the steering system and cause loss of control.
PAGE 13
Rear Derailleur Adjustments - continued Operation F fig E B TO TEST THE TIGHTNESS OF THE HANDLEBAR CLAMP: • Hold the bicycle stationary and try to move the ends of the handlebar up and down . 1 2 3 4 5 A 2 1 H Adjust the Index Shift System: • Shift the chain onto the smallest rear sprocket. • Without turning the crank, turn the Right Shift Control one “click” rearward. • Slowly turn the crank forward. • The chain should move from the smallest rear sprocket to the next larger rear sprocket.
PAGE 14
Rear Derailleur Adjustments WARNING: To prevent the Seat coming loose and possible loss of control, the “MIN-IN” (minimum insertion) mark on the Seat Post must be BELOW the top of the Seat Tube . The rear derailleur has two adjusting screws. The “low” adjusting screw, sometimes marked L, limits how far the rear derailleur and chain can move toward the wheel. The “high” adjusting screw, sometimes marked H, limits how far the rear derailleur and chain can move away from the wheel.
PAGE 15
Seat Bolt Saddle Adjustment (various models) CAUTION: Do not force the shift lever. Shift only when pedaling forward and without strong force. Do not backpedal. Backpedaling can cause the chain to come oﬀ the sprockets. Backpedaling and shifting while not pedaling can damage the sprockets and stretch the cable wire. There is no “correct gear” in which to ride the bicycle. The “correct gear” is the one that is comfortable to you.
PAGE 16
Shift System Assembly CAUTION: There is a RIGHT pedal marked R and a LEFT pedal marked L. L Parts of the Shift System: • Right-hand Shift Lever • Rear Sprocket Set . C NOTE: A Pedal Wrench is preferred for attaching Pedals. A thin open-end wrench can also be used. A operates the Rear Derailleur B. Operation Pedal Installation fig A • The pedal marked R has right-hand threads. Tighten it in a clockwise direction. • The pedal marked L has left-hand threads.
PAGE 17
Tires (as equipped) C Operation D NOTE: Models with Display please see included manual KD58C-LCD MAINTENANCE: • Frequently check the tire inflation pressure because all tires lose air slowly over time. For extended storage, keep weight off of the tires. • Do not use unregulated air hoses to inflate the tire/tubes. An unregulated hose can suddenly over inflate tires and cause them to burst. • Replace worn tires. A Assembly Operation WARNING 1.
PAGE 18
Charging the Drive Battery: IMPORTANT! Before using the unit for the first time fully charge the Battery. Battery Charger will shut off when Battery is fully charged, but never charge longer than 12 hours. NOTE: Your e-Bike Li-Ion Battery can be charged either installed in the bike or removed. Assembly STEPS: 1. Insert and turn Key fully Counter Clockwise before starting. 2.