苏州万佳电器有限公司 Suzhou wanjia Electric Co.,Ltd.
苏州万佳电器有限公司 Suzhou wanjia Electric Co.,Ltd. Contents 1. 2. 3. 4. 5. 6. 7. 8. Product name and model........................................................................ 1 Specifications ......................................................................................... 1 Appearance and Size ............................................................................. 1 Functuion Summary................................................................................ 1 Function Area Distribution....
苏州万佳电器有限公司 Suzhou wanjia Electric Co.,Ltd. 1. Product name and model E-bike Intelligent LCD display Model: DR25 2. Specifications 36V/48V Power Supply The maximum working current: 30mA Off-state leakage current: <1μA Operating temperature: -20℃~ 60℃ Storage temperature: -30℃~ 80℃ 3. Apperance and Size Product appearance and dimensional drawing (unit: mm) 4. Function Summary DR25 display has many functions to meet the user’s needs.
苏州万佳电器有限公司 Suzhou wanjia Electric Co.,Ltd. 5. Function Area Distribution General function Info Light Battery Interface Unit Info Push-assist Speed Info Assist-level Function Info 6. Button definition There are five buttons on DR25 display: power button MODE button , UP button , DOWN button , light button , . In this manual we use words “ON/OFF”, “Light” , ”MODE”, “UP”and “DOWN” to represent these 5 buttons. 7. Installation DR25 can be mounted on the left side of handlebar close to its grip.
苏州万佳电器有限公司 Suzhou wanjia Electric Co.,Ltd. Press the “MODE” button and switch between: TRIP(Km)→ODO(Km)→ RANGE(Km) →Trip (Km) Display interface Switching Push-assist Mode On/Off To activate the push-assistance function, short press MODE button and hold the DOWN button between 3S. E-bike is activated with a uniform speed of 6 km/h while the screen displays shown “ ”.
苏州万佳电器有限公司 Suzhou wanjia Electric Co.,Ltd. Press UP or DOWN button to switch between the assist levels and change the motor output power, The default assist level ranges from level “OFF” to level “5”, The output power is zero on Level “OFF”. Level “1” is the minimum power. Level “5” is the maximum power. Assist Level Interface Battery Indicator The default voltage of display battery is 36V. The segmented voltage values are 31.5V-32.5V-34.35V-36.03V-37.48V-39.46V.
苏州万佳电器有限公司 Suzhou wanjia Electric Co.,Ltd. Or else, you will not be able to ride the bike normally. Please always refer to an authorized bicycle dealer. 9. General Settings Press the ON/OFF button to switch on the display. To access Setting interface , hold both the “MODE” button and the “DOWN” button simultaneously for 1S. All the settings are implemented on a parked bike of no speed.
苏州万佳电器有限公司 Suzhou wanjia Electric Co.,Ltd. Wheel Size Interface Push-assist Interface Speed Limitation Interface Software version of Display Interface Unit Interface LCD Brightness Interface Software version of Controller Interface Version of Controller Interface Version of Controller Boot Interface Wheel Size Interface Wheel Size settings DIR represents wheel diameter. The wheel size is only for your information, not settable. Hold “MODE” button to return to home page.
苏州万佳电器有限公司 Suzhou wanjia Electric Co.,Ltd. Software version of Controller CLS represents the software version of controller. The software version of controller is uploaded by the controller, and the display can’t be adjusted. Software version of Controller Info Software version of Display dPS represents the software version of display.
苏州万佳电器有限公司 Suzhou wanjia Electric Co.,Ltd. LCD Brightness BLG represents Backlight level settings. The settable range is Level 1, Level 2 , Level 3 , Level 4 , Level 5. Level 1 is the darkest, Level 3 is standard and Level 5 is the brightest. The default value is decided by the controller when the display leaves factory. Press UP/DOWN to change the brightness levels. Hold the ON/OFF button to confirm and exit the settings.
苏州万佳电器有限公司 Suzhou wanjia Electric Co.,Ltd. TRIP clear function In TRIP mode and Trip is not 0, press the UP and DOWN buttons at the same time for more than 1 second to clear the trip data information. Exit settings In personalized parameter settings interface, Short press the MODE button is to confirm the input. Hold the MODE button is to store the settings.
苏州万佳电器有限公司 Suzhou wanjia Electric Co.,Ltd. Quality assurance and warranty scope Ⅰ Warranty 1) The warranty will be valid only for products used in normal usage and conditions. 2) The warranty is valid for 24 months after the shipment or delivery to the customer. Ⅱ Others The following cases do not belong to warranty scope: 1) The display is demolished. 2) The damage of the display is caused by wrong installation or operation. 3) The shell of the display is broken after the display is out of the factory.
苏州万佳电器有限公司 Suzhou wanjia Electric Co.,Ltd. Wire serial Code Function 1 BAT Battery power wire 2 GND Ground wire 3 DTX Data transmission wire of the display 4 DRX Data receiving wire of the display 5 ON-OFF 6 Walk Controller power control wire Push control wire displays have wire connection with water-proof connectors, users can not see the pin wire colors. Warnings: 1． Use the display with caution. Don’t attempt to release or link the connector when battery is power on.
苏州万佳电器有限公司 Suzhou wanjia Electric Co.,Ltd.
苏州万佳电器有限公司 Suzhou wanjia Electric Co.,Ltd.
