User Manual
Table Of Contents
- Product name and Model
- Specifications
- Appearance and Size
- Function and Button Definition
- Install Instructions
- General Operation
- General Settings
- ◆Trip Distance Clearance
- ◆Unit Mile/KM toggling
- ◆Wheel Diameter Settings
- ◆Speed limit Settings
- ◆Battery Power bar Settings
- ◆Assist Level Settings
- ◆Controller Over-current Cut Settings
- ◆Power assist Sensor Settings
- ◆Speed Sensor Settings
- ◆Slow Start up Settings
- ◆Backlight Brightness Settings
- ◆Power-on Password Settings
- Power-on Password Enable/Disable
- Power-on Password Change
- ◆Exit settings
- Recover default settings
- Quality assurance and warranty scope:
- Warnings:
- Attached list 1: Error code definition
- Attached list 2：Assist level ratio defaults
4
◆Power Indicator
Assist Level “4”
The output power of the motor can be indicated by below interface.
◆Error code Indication
Motor Power Interface
The components of the E-bike system are continuously and automatically monitored.
When an error is detected, the respective error code is indicated in text indication area.
Refer to the detailed definition of the error codes in Attached list 1.
Error Code Indication
■
Have the display inspected and repaired when an error code appears. Or else,
you will not be able to ride the bike normally. Please always refer to an authorized
bicycle dealer.
General Settings
After the E-bike system is switched on,
To access General Settings menu, hold both the UP and DOWN button
simultaneously for 2s.
Press the Up or DOWN button to choose setting items and press ON/OFF to enter
the setting interface.