User Manual
Table Of Contents
- Product name and Model
- Specifications
- Appearance and Size
- Function and Button Definition
- Install Instructions
- General Operation
- General Settings
- ◆Trip Distance Clearance
- ◆Unit Mile/KM toggling
- ◆Wheel Diameter Settings
- ◆Speed limit Settings
- ◆Battery Power bar Settings
- ◆Assist Level Settings
- ◆Controller Over-current Cut Settings
- ◆Power assist Sensor Settings
- ◆Speed Sensor Settings
- ◆Slow Start up Settings
- ◆Backlight Brightness Settings
- ◆Power-on Password Settings
- Power-on Password Enable/Disable
- Power-on Password Change
- ◆Exit settings
- Recover default settings
- Quality assurance and warranty scope:
- Warnings:
- Attached list 1: Error code definition
- Attached list 2：Assist level ratio defaults
9
Speed Sensor Settings
◆Slow Start up Settings
Slow Start represents slow start up. The range is 1-4 seconds. 4 is the slowest.
To change slow start up settings, press the UP or DOWN button to change the value
and press the ON/OFF button to confirm. The screen says 'OK' and return to previous
menu. The default value is 1.
Slow Start up settings interface
◆
Backlight Brightness Settings
Backlight Set represents backlight brightness settings. Level “1” is the low
brightness, Level “3” is high brightness. The default level is “2”.
To change the backlight brightness, press the “+” button or the “-” button to choose
the desired brightness.
To store a changed setting, press the “ON/OFF” button. The screen says “OK” and
returns to previous menu interface.
Backlight Brightness Settings Interface