Instructions/Assembly Guide

19
1
2
3
4
1
1
2
2
2
3
Accessories (various models)
INSULATED BAG INSTALL:
1. Attach Bag
A
to Handlebar by
sliding the Back Brace
B
securely
into the Bracket Slots
C
.
2. If needed, adjust Brackets
C
by
loosening Screws
D
, and moving
Brackets closer together or further
apart so that Bag  ts into the
Brackets Slots.
3. Tighten Screws
D
Securely.
LUGGAGE RACK ADJUSTMENT:
1. Loosen Adjustment Knob
A
by turning
counter clockwise.
2. Slide Adjustable Rack
B
into position
3. Tighten with Adjustment Knob
A
by
turning clockwise.
NOTE: Do not over-tighten. This will damage
the Knob.
B
A
A
B
C
D
CUP HOLDERS VARIOUS:
• If necessary, rotate Cup Holder to level position.
• Attach Cup Holder using supplied hardware as
shown. Tighten securely.
• Follow numbers for assembly steps.
WARNING: Do not carry hot liquids!
Assembly