User Manual

shortly press , PAS grade -1
5.3.2 Shift the speed display
Long press
+ , to shift the way of speed display
5.3.3 ON/OFF 6KM/H cruising, ON/OFF Headlight, Reset ODO
When e-bike stops, long press to enter 6KM/H cruising mode. During the riding, long press to enter
Real-time Cruising mode. If the e-bike is on Cruising mode, long press to exit;
Long press to turn on/off Headlight;
5.3.4 ON/OFF the screen
Long press to turn ON/OFF the screen.
5.3.5 Change data in multi-function Area
Shortly press to change data.
5.3.6 Parameters setting
Long press + to start setting parameters, such as wheel size(inch), background luminance… (Refer to
P00-P19)
On the setting interface, shortly press , or to plus/minus value. Parameters would be shining after
modifying, choose the ones you prefer,
a. Long press to save the value, the shining would stop.
b. Shortly press to shift to the next parameter, and to save current values at the same time.
c. Press + to exit setting parameters and to save values. If not press these buttons, it would exit and
save parameters modified automatically 10s later.
6．Parameters setting
P00: Restore Factory Settings Set this value to 10 and switch to next setting,the display items will show all contents and restore
original factory settings.
P01 Background luminance. 1 is the darkest, 3 is the brightest
P02 Unit of the mileage. 0 is KM, 1 is MILE
P03 Voltage grades. 24V, 36V, 48V. The original voltage is 36V.
P04 Sleep time. 0 never sleep, other numbers stand for the sleep time (1-60 min).
P05 PAS grades.
0, 3 grades mode: 1 grade 2V, 2 grade 3V, 3 grade 4V
1, 5 grades mode: 1 grade 2V, 2 grade 2.5V, 3 grade 3V, 4 grade 3.5V, 5 grade 4V
P06 Wheel size. Unit: inch. Precision: 0.1
P07 Speed measuring magnet. Range: 1-100