User Manual

11
◆Exit settings
In the settings state,
Press the ON/OFF button to confirm the input.
Hold the ON/OFF button for 2s to save the settings and then exit the current settings.
Hold the DOWN button for 2s to cancel the operating but not to store the settings,
and then return to previous menu.
■ If there is not any operations in one minute, display will exit the settings state
automatically.
Recover default settings
dEF means recover default settings. Press both the UP and ON/OFF button for 2 s to
enter recover default settings. Press the UP or DOWN button to choose Y or N. Y means
that recovers default settings. N means that do not recover default settings. When it is Y,
hold the ON/OFF button for 2 s to recover default settings, the display shows ‘dEF-00’ at
the same time, and then return to general display state.
The default value is N.
Recover Default Settings Interface
Quality assurance and warranty scope:
I. Warranty:
1) The warranty will be valid only for products used in normal conditions.
2) The warranty is valid for 24 months after the shipment or delivery to the customer.
II. The following cases do not belong to warranty scope:
1) The display is demolished.
2) The damage of the display is caused by wrong installation or operation.
3) The shell of the display is broken after the display leaves the factory.
4) The cable of the display is broken.
5) Beyond warranty period.
6) The fault or damage of the display is caused by the force majeure (e.g., fire,
earthquake, etc.).