Owner's Manual

11
Rear Fender Assembly
Note: Top Fender mount is loose (fi g 06) to allow installation.
1. Line up the Rear Fender Braces (A) with the Frame Mounting Tabs (B) (fi g
05).
2. Insert each lower mounting Bolt (7) and Washer (6) into the Frame Mount-
ing Tabs (B) and tighten securely. Make sure fender is centered over tire.
g 05
6
7
B
B
A
Tighten Top Fender Mount:
3. Tighten Bolt (11) and Nut (10) securely. Make sure fender is centered over
tire (fi g 06).
g 06
11
10
Note: Ensure wheel spins freely without contacting frame or fender.