Owner's Manual

10
Front Fender Installation Continued:
Model without Front Refl ector:
8. Place the Fender (3) in the fork
with the longer fork mounting tab
(A) on the rear side of the fork (fi g
02).
9. Insert the Bolt (8) through the
Washer (9) and Fender Tabs (A,D)
and fork mounting hole.
10. Install Washer (9) and Nut (10)
onto Bolt (8) and tighten securely.
g 01
g 02
8
9
A
10
9
3
Attaching Lower Fender Braces:
11. Line up the lower Fender Braces
(B) with the Fork Mounting Tabs
(C) (fi g 03).
12. Insert each lower mounting Bolt
(7) and Washer (6) into the Fork
Mounting Tabs (C) and tighten
securely.
g 03
7
6
B
C