Owner's Manual

18
Front and Rear Refl ector Installation
g 12
20
27
WARNING: Ensure the Front Refl ector is White and the Rear Refl ector is
Red.
1. Position REAR Refl ector (20) so it
points straight backwards.
2. Tighten Clamp Screw.
NOTE: Do not over-tighten. This will
damage the Clamp.
1. Position FRONT Refl ector (27) so it
points straight forward.
2. Tighten Clamp Screw.
NOTE: Do not over-tighten. This will
damage the Clamp.
Assembly