Owner's Manual

• Point the Seat (22) forward and put the

Seat Post (19) into the Seat Tube (B)

(ﬁ gs 10, 11).

WARNING: To prevent the seat com-

ing loose and possible loss of control, the

“MIN-IN” (minimum insertion) mark (C) on

the seat post must be below the top of the

Seat Tube (B).

g 10

Tighten the quick release lever:

• Move the Quick Release Lever (D) to

the “open” position so the word “open”

is pointing away from the Seat Post

Clamp (E).

NOTE: The words “open” and “close” are on

opposite sides of the quick release lever.

g 11

Seat Installation (various models) - continued

Seat to Seat Post (Single Bolt Style): Some models are

equipped with a seat and seat post assembly that uses a

single bolt and nut to secure the seat to the seat post. The

seat is assembled to the seat post at the factory.

Ensure the seat is secure to the seat post and the seat bolt

is tightened. Recommended torque = 7.3 ft-lbs (10 N•m).

Assembly