Backboard and Rim Owners Manual Customer Service Center • N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A. Read and understand operator's manual before using this unit. Failure to follow operating instructions could result in injury or damage to property. REQUIRED TOOLS AND MATERIALS: • Step Ladder 8 ft. (2.4 m) • Adjustable Wrench • Wrenches: 7/16”, 1/2”, 9/16”, 3/4” Toll-Free Customer Service Number for U.
BEFORE YOU START! To ensure optimal playability of backboard system, a close tolerance fit between the elevator components and hardware is required. Test fit large bolts into large holes of elevator tubes, backboard brackets and triangle plates. Carefully rock them in a circular motion to ream out any excess paint from holes if necessary. AVANT DE COMMENCER ! Pour garantir l'utilisation optimale du panneau, les composants du système élévateur et la visserie doivent être bien ajustés (serrés).
SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE AND WILL VOID WARRANTY. Owner must ensure that all players know and follow these rules for safe operation of the system. To ensure safety, do not attempt to assemble this system without following the instructions carefully. Proper and complete assembly, use and supervision is essential for proper operation and to reduce the risk of accident or injury.
NOTICE TO ASSEMBLERS ALL Huffy Sports Basketball Systems, including those used for DISPLAYS, MUST be assembled and ballasted with sand or water according to instructions. Failure to follow instructions could result in SERIOUS INJURY. It is NOT acceptable to devise a makeshift weight system. IMPORTANT! Remove all contents from boxes. WARRANTY CARD: Please remember to complete your product registration form either on-line at: www.huffysports.com/warrantycard or mail-in the enclosed postcard.
Get to know the basic parts of your basketball system.....
PARTS LIST (See Hardware Identifiers) Item Qty. 1 2 3 4 5 6 7 8 9 10 11 4 2 6 6 6 8 4 2 2 2 2 Part No. Description Item Qty. 202341 200837 201107 203326 203228 203100 203104 900964 206360 200874 201124 “L” Bracket Spacer, Plastic Bolt, Hex Head, 1/4-20 x 1/2 Long Washer, Lock, 1/4 Nut, 1/4-20 Hex Flange Nut 5/16-18 Bolt, Hex Flange, 5/16-18 x 2 Long Bracket, Backboard Support Bolt, Hex Head, 3/8-16 x 2.625 Long Spacer, Steel .402 I.D. x .50 O.D. x 1.
SECTION A: ASSEMBLE THE BACKBOARD AND RIM This is what your system will look like when you’ve finished this section: HARDWARE USED IN THIS SECTION (not actual size) TOOLS REQUIRED FOR THIS SECTION 3/4", 9/16” and 1/2” Item #18 (2) Item #3 (6) Item #15 (4) Item #7 (4) AND/OR Item #4 (6) Item #9 (2) Item #16 (8) 3/4", 9/16” and 1/2” Item #19 (2) Item #11 (2) Item #10 (2) 7 Item #6 (8) Item #17 (4) 06/03 Item #5 (6) Item #13 (12*) P/N 211540D
IMPORTANT! WRITE DOWN MODEL NUMBER FROM BOX ON PAGE 1 OF THIS OWNERS MANUAL IMPORTANT! 1. For spring loaded rim assembly, refer to instructions included with rim hardware. EXTENSION ARM MOUNT Extension Arm - Not Included 1 3 5 1 4 6 15 7 IMPORTANT! For spring loaded rim assembly, refer to instructions included with rim hardware. 16 NOTE: 6 Peel protective film from surface of acrylic backboard prior to use. 2 NOTE: We recommend mounting backboard to a solid material (steel) behind rim area.
POLE, ROOF, OR WALL MOUNT Model 8406 Universal Mounting Bracket is available for purchase by calling this number: 1-800-558-5234 POLE MOUNT Pole Mount - Not Included Model 8406 Universal Mounting Bracket (Not Supplied) 5 Model 8406 Universal Mounting Bracket is available for purchase by calling this number: 1-800-558-5234 4 3 3 5 WALL MOUNT 4 Wall Mount - Not Included 15 15 IMPORTANT! For spring loaded rim assembly, refer to instructions included with rim hardware.
ROOF MOUNT Roof Mount - Not Included Top View 5 4 3 4 3 15 5 IMPORTANT! 1 6 5 For spring loaded rim assembly, refer to instructions included with rim hardware.
ELEVATOR MOUNTS Specific Elevator Mount Components Are Not Included IMPORTANT! All Elevator mounts will require this initial step of attaching brackets (8) to the backboard. IMPORTANT! It is necessary for all parts to be installed properly for this mechanism to work safely and properly. NOTE: Peel protective film from surface of acrylic backboard prior to use. 8 11 10 8 8 10 A SPRING STYLE ELEVATOR MOUNT NOTE: 6 Use existing elevator components.
SPRING STYLE ELEVATOR MOUNT (continued) NOTE: Use existing elevator components. 8 B BRONZE RATCHET ELEVATOR MOUNT NOTE: Use existing elevator components.
BRONZE RATCHET ELEVATOR MOUNT (continued) NOTE: Use existing elevator components. NOTE: Use existing elevator components.
C STAMPED RATCHET ELEVATOR MOUNT NOTE: Use existing elevator components. 8 NOTE: Use existing elevator components.
STAMPED RATCHET ELEVATOR MOUNT (continued) IMPORTANT! NOTE: For spring loaded rim assembly, refer to instructions included with rim hardware. Use existing elevator components.
D APOLLO ELEVATOR MOUNT NOTE: IMPORTANT! Use existing elevator components.
2. Install clips. WARNING! USE OF THIS PRODUCT WITHOUT PROPER INSTALLATION OF SMART CLIPS, OR WHEN ALL SMART CLIPS ARE NOT PRESENT COULD RESULT IN BODILY HARM. BE SURE TO FOLLOW DIRECTIONS CAREFULLY. CLIP “ARM” CLIP “BODY” 12 Insert one “arm” of clip into ram as shown. Twist “body” of clip slightly so that second “arm” slides over the top of the first “arm” as shown. Push in direction indicated by arrows. 13 A Push second “arm” back and into ram as shown.
NET INSTALLATION 12 5. SIDE VIEW 13 NETCLIP 14 NET Insert net into bottom of clip as shown. SIDE VIEW Twist net until it snaps into position. Net must be centered through clip.
