User Manual

12
Assembly
Installation:
1. Attach Support Legs
A
to bottom of
Basket
B
using Bracket
C
, 2 Screws
D
, 2 Washers
E
and 2 Nuts
F
.
Tighten Securely.
2. Make sure top of Support Legs
A
set
between Bracket
C
and Basket.
3. Install the front wheel into the fork
as described in the owner’s manual.
Ensure the wheel retainer clips are
located in the holes in the fork.
4. Remove the front Axle Nuts
G
.
With the retainer
clips still on the
fork, place the
Support Legs
A
onto the Axle
H
on both sides.
5. Reinstall the Axle
Nuts
G
hand
tight.
6. Place Basket into
position against upper
Bracket
I
and attach
with 2 Screws
D
, 2
Washers
E
and 2 Nuts
F
. Tighten Securely.
7. Realign the front
wheel as needed and tighten Axle
Nuts securely according to Torque
Chart.
WARNING:
• Failure to obey these steps can allow the front wheel to loosen while riding. This can
cause injury to the rider or to others.
• Maximum basket weight is 4.5kg (10lbs).
B
I
D
E
F
A
G
F
H
C
B
E
A
Mounted Wire Basket Assembly (if equipped)