Owner's Manual

9
Stem Removal and Installation:
• Assembly
5mm
4
3
3
6
8
1
2
3
4
7
5
3
6
8
A
Steps:
1. Rotate the Stem (3) so that it points For-
ward and upward.
2. Install Stem (3) on Fork Tube (5) and
against Spacers (7).
3. Align Stem (3) with Fork (6) and Brake
Calipers (8) so it points forward.
4. Tighten Stem Screws (4) securely.
Steps:
1. Make sure the Stem (3) is
pointing upward and facing the
same direction as the Fork (6)
and Brake Calipers (8).
Installing The Stem
Final Check
5. Install Cap (2) in top of Stem
(3) and tighten Cap Screw (1)
securely.
6. Push rubber Plug (A) into Screw
(1).