Owner's Manual

Pedal Installation

NOTE: There is a pedal marked “R” and a pedal marked “L”.

• The pedal marked “R” has right hand threads. Insert it into the crank arm on the

right side. Tighten it in a clockwise direction.

• The pedal marked “L” has left hand threads. Insert it into the crank arm on the

left side. Tighten it in a counterclockwise direction.

• Make sure both pedals are threaded fully into the crank arm. Tighten the pedals

to ensure they will not come loose.

Note: A Pedal Wrench is preferred for attaching Pedals. An open-end

wrench can also be used as shown.

• Assembly

WARNING: Pedals must be

sufﬁ ciently tightened to ensure they do

not come loose.