Owner's Manual

15
Seat Installation
9
7
A
8
10
11
10
11
X 4
X 4
9
X 4
5mm
8
X 4
• Assembly
Steps:
NOTE: Make sure the longer bolts (8) are used in the front holes.
1. Position the Seat (7) over the frame bracket holes (A).
2. Install the two long Screws (8) in the front seat holes and through frame bracket
holes.
3. Install the two short Screws (9) in the rear holes and through frame bracket holes.
4. Install the Washers (10) and Nuts (11).
5. Tighten securely.
WARNING: Do not over-tighten the screws. Over-tightening the screws can
damage the Seat.