Owner's Manual

4 4
Tools necessary for assembly:
Phillips screwdriver
The instructions in this manual refer to the right and left side of the product, these are defi ned from the rider position.
Do not discard any parts until the unit is completely assembled.
WARNING:
Wheels & Axle:
• The wingnuts must be securely tightened to ensure rear wheels do not come loose from the axle.
• All hardware must be suffi ciently tightened to ensure it does not come loose.
Pivot Bolt:
Pivot hardware must be correctly installed to ensure they do not come loose.
Steering Function:
• Over tightening the steering linkage may prevent the steering from operating properly.
• Pulling back on the right lever, and pushing forward on the left lever will turn the product towards the right.
• Pulling back on the left lever, and pushing forward on the right lever will turn the product towards the left.
• Steering this product takes some practice. Ensure the rider can properly steer the product. Practice in an open area.
Seat:
Secure the seat bolt each time the seat is moved.
Flag:
The fl ag is provided to make the rider and the product more visible. Do not use the product without the fl ag installed.
Assembly Notes