Bluetooth Headset User Guide HCC03
Index 1. Notice before using 2. Package List 3. Product Introduction 4. Charging HCC03 5. Power On/ Off 6. Pairing HCC03 (or any Bluetooth Device) 7. Settling HCC03 8. Answering calls 9. Refusing calls 10. Ending calls 11. Voice Dialing 12. Redialing 13. Transferring calls 14. Maintaining calls 15. Holding Call 1 and answering Call 2 16. Triple Phone Conversation 17. Adjusting the Volume 18. Safety Instruction 19. Specifications 20. Excluding Problems 21. Storage of HCC03 22. Q & A 23.
1. Notice before using Thank you for purchasing our Bluetooth Headset HCC03. First of all, please check to find everything in your package and carefully study the user guide to know the function details. HCC03 is developed by the innovative Bluetooth wireless technology, enabled to connect the Bluetooth mobile phone, PDA, desktop and notebook with the USB Bluetooth Dongle plugged-in, etc. Before using it, please confirm your mobile phone complies with Bluetooth V1.1/ V1.2/ V2.
3. Product Introduction Function (Answering/ Ending/ On/ Off) Button 3 LED (Indicator) Light Receiver (Speaker) Microphone Power Interface adapter (charging) Decrease Volume key (-) 1 Increase Volume key (+) 2 Indicator light Speaker Note: ● For first time use, make sure to fully recharge HCC03 battery.
4. Charging HCC03 HCC03 comes with a Lithium Polymer battery built-in. 1. Plug the car charger into the car lighter. 2. Plug the end of the car charger into the power interface adapter of HCC03. 3. While charging, the indicator will turn red; when charging is completed, the red indicator will shut off or flashes red. Note: Charging time is around 90~120 minutes. ● For first time use, make sure to fully recharge HCC03 up to 4 hours.
5. Power On/ Off 1. Press and hold the function button for 2~3 seconds, the power will turn on after the indicator flashes the blue light 3 times. 2. To turn the power off, press and hold the function button for 2~3 seconds until you see the red indicator flash 3 times. Note: ● While turning HCC03 on, you will hear the “Du Du” sound from the receiver.
pairing mode. 3. Ensure your mobile phone has the Bluetooth function and start the Bluetooth new device searching function. Please follow the instructions of your mobile phone to proceed the operation. 4. When your mobile phone is in the stage of searching a new Bluetooth device, it will find HCC03. 5. Please choose and confirm HCC03. 6. Key in HCC03 Password “0000” and press YES. If the pairing is successful, the indicator turns to flash the blue light only.
proceed the operation. 7. Settling HCC03 Please clipping HCC03 above the speaker vertically to keep HCC03 at the best working position 8. Answering the calls 1. While there is a call coming, wait until you hear the ringing from HCC03 receiver to press the function button to answer the call. 2. If the mobile phone is ringing first, wait until HCC03 is ringing, then press the function button.
3. While answering the calls, the blue indicator light flashes 4 times each second. 4. If the mobile phone is ringing and HCC03 is off, turn on HCC03 first, then press the function button to answer the call. 5. If your mobile phone has the function of automatically receiving calls and you already set it up, while the call is coming, HCC03 can receive the call automatically without pressing the function button.
1. If your mobile phone supports the voice dialing function, you can use this function with HCC03 too. 2. Under the standby or connecting mode, press the function button of HCC03 and follow the mobile phone instructions to proceed with the voice dialing. Note: ● The activation of the voice dialing function will depend on the design and also the setting of your mobile phone.
press the function button of the mobile phone to transfer the call to HCC03. For some mobile phones, the phone LCD will show the transferring sign, some will not. Note: ● To activate this function, your mobile phone must support the Handsfree mode. For more details, please check the manual of your mobile phone. 14. Maintaining calls 1. When you are answering the call with HCC03, press the decrease (-) volume key for 2~3 seconds until you hear one “Du” sound, then the call will be maintained.
While you are answering Call 1 from HCC03, and having the interrupting call, you will hear the notifying “Du Du” sound. Press and hold the decrease (-) volume button for 2~3 seconds until you hear one “Du” sound followed by the music, Call 1 will be Hold and the interrupting call (Call 2) will be answered automatically. Note: ● To activate this function, please make sure the assigned telecommunications agent provides this service.
ton, then Call 1 and Call 2 will be hanged up together. Note: ● To activate this function, you must make sure the assigned telecommunications agent supports this service. ● To activate this function, please refer to the instructions of your mobile phones manual to make sure your phone program supports this function. ● When the triple phone conversation is on board, it can not return to the mode of having only Call 1 or Call 2.
1. Read the manual of HCC03 carefully and use HCC03 correctly by following the instructions. 2. Do not use the cleaning liquid or spray to clean HCC03. 3. Do not disassemble HCC03. If you encounter a problem, contact the retailer shop. ● Urgent handling -If you enconter a problem, turn off HCC03 first. -If the inside components breakdown, please contact the repairing center to ask for immediate support and service. 19. Specification Product Model No.
Power Supply 5V DC, 100~240V AC adapter Operation Temperature -10 ~ 55 ℃ Facility Saving Temperature -20 ~ 60 ℃ Operation Moisture 10% ~ 90% (non-concrete status) Weight 42 g (battery included) Size 89x50x18 mm Safety Regulation CE, FCC 20. Excluding Problems 1. You hear no sound coming from HCC03: - Make sure HCC03 has been paired with the other Bluetooth device. - Make sure HCC03 is on. - Make sure the distance between HCC03 and the paired Bluetooth device is within 10 meters.
- Put HCC03 away from places full of dust. - Use clean and soft fabric to clean the surface HCC03. - Be aware not to let Children play with HCC03, avoiding accidents from happening or damaging the product. - Avoid storing HCC03 in high or extra low temperature. 22. Q & A Q : Why does HCC03 under the “On” mode not work with the Bluetooth mobile phone? A : You must activate the Bluetooth function of your mobile phone and finish the pairing between your mobile phone and HCC03.
A : Most of the mobile phones are allowed to find more than one Bluetooth device within the working range. When the searching is finished, your mobile phone’s LCD will show HCC03 or some Unknown Devices. Please select and confirm HCC03. Q : Why my mobile phone could not find HCC03? A : Only while HCC03 is under the pairing mode, your mobile phone can find HCC03. Please follow the instructions of HCC03 manual to proceed the pairing process. Q : Shall we pair HCC03 every time while using it? A : No.
nal and increase the volume of the mobile phone or HCC03. Q : Why is HCC03 suddenly not working? A : (1) HCC03 might suffer a bad connection get. (2) The Bluetooth function of your mobile phone gets crashed or hanged. It happens occasionally, please turn the Bluetooth function of the mobile phone off, and renew it or turn off your Bluetooth mobile phone and turn it on again. Q : Why could the voice dialing function of HCC03 not be switched on? A : (1) Please re-record the voice tag.
BQB Qualification: HCC03 Bluetooth Headset, a BQB Qualified Bluetooth product is listed as qualified End Product in accordance to section 6.2.4 of the PRD. Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.
-Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device.
20
21
