User's Manual

7. Make a call from memory
Operation:
a. Press “V+“ for 3 seconds to enter the memory list, during link/stand-by mode. The LCD shows the “memory 1” number.
Press “V+” or “V-“ to select the number you like to call
b. Press “Yes” to make a call.
c. If you don’t want to call, press “No” to escape it and back to Stand by mode.
8. Trouble shooting
a. anytime the carkit doesn’t perform right, press “No” for 3 seconds to restart the device.
b. If you still cannot solve the problem, open the battery case, and remove the battery. Put the battery in again, close the battery
case. Then restart the device.
b. If you still cannot solve problem, Press “V-“ and “No” together, for 3 seconds. It will reset the device to the factory status. Be
careful you will lose every data in the carkit, after doing the factory reset.