User's Manual

♦ Press and hold “Vol (+) button” to disable Mic mute function in during an on-going call.
5. call back from receiving list
♦ After you receive a coming call, the caller number will be stored in the receiving list.
♦ The memory could keep 4 numbers in the receiving list.
♦ You can dial out these 4 numbers in the carkit
Operation:
a、 Press “V-“ for 3 seconds to enter the receiving list, during link/stand-by mode. The LCD shows the last receiving number.
b、 Press “V+” or “V-“ to select the number you like to call
c、 Press “Yes” to make a call.
d、 If you don’t want to call, press “No” to escape it and back to Stand by mode.
6. Store numbers from receiving list
♦ After you receive a coming call, the caller number will be stored in the receiving list.
♦ You can save 4 numbers from receiving to the memory.
Operation:
a. You have to be in the no link/stand by mode.
b. Press “V-“ for 3 seconds to enter the receiving list, the LCD shows the last receiving number.
c. Press “V+” or “V-“ to select the number you like to store.
d. Press “Yes” for 3 seconds, then the LCD shows “M1?”, it means you store this number in the memory one. You can press
“V+” or “V-“ to select the memory space from “M1”, “M2” to “M3”, and “M4”
e. Press “Yes” for 3 seconds to confirm. The LCD shows “Save OK”. Be careful it erases the previous saving.
f. If you don’t want to save, press “No” to escape it and back to Stand-by mode.