User's Manual
d. LCD flips over: During No link/stand by mode (LCD shows “Blue Voice”), press “V+” and “V-“ together.
e. Connect to the last linked phone: During No link/stand by mode (LCD shows “Blue Voice”), press “Yes” to link to the last
linked phone.
f. Connect to other paired phone:
♦ During No link/stand by mode (LCD shows “Blue Voice”), press “Yes” for 3 seconds to enter the paired phone list.
The LCD shows the paired phone name.
♦ Press “V+” or “V-“ to select the phone you like to link.
♦ Press “Yes” to link. LCD shows the phone name.
g. Disconnect the carkit and mobile phone
♦ During the connection mode, you could see the phone name on LCD. Press “Yes” for 3 seconds to disconnect.
h. Answer
♦ While an incoming call, the car kit rings and the caller’s ID of the call is shown on the LCD.
♦ Press “Yes” to answer the call.
i. Reject an coming call
♦ While an incoming call, press “NO” to reject the call.
j. Terminate a call
♦ During an active call, press “NO” to terminate.
k. Voice Transfer between carkit and phone, while an on-going call
♦ Press “Yes” for 3 seconds to transfer voice between the car kit and your mobile phone, during an on-going call, for
your privacy.
l. Adjusting the Volume
♦ Press “Vol (+) button” for higher volume in talking mode.
♦ Press “Vol (-) button” for lower volume in talking mode.
m. Mute
♦ Press and hold “Vol (-) button” to enable Mic mute function in during an on-going call.