Bluetooth Headset User Guide HCB86
Index 1. Notice before using 2. Package List 3. Product Introduction 4. Charging the Headset 5. Power On/ Off 6. Pairing the Headset (or any Bluetooth Device) 7. Pair with 2 Bluetooth phones 8. Operating method: While answering the call from 1st phone, there comes another call from 2nd phone 9. Wearing the Headset 10. Answering calls 11. Refusing calls 12. Ending calls 13. Voice Dialing 14. Redialing 15. Transferring calls 16. Maintaining calls 17. Ending Call 1 and answering Call 2 18.
1. Notice before using Thank you for purchasing our Bluetooth Headset HCB86. First of all, please check to find everything in your package and carefully study the user guide to know the function details. HCB86 is developed by the innovative Bluetooth wireless technology, enabled to connect the Bluetooth mobile phone designed with Audio Gateway (HCB18/ HCB21), PDA, desktop and notebook with the USB Bluetooth Dongle plugged-in, etc.
3. Product Introduction Function (Answering/ Ending/ On/ Off) Button 3 LED (Indicator) Light Receiver (Speaker) Microphone Power Interface adapter (charging) Ear Hook Decrease Volume key (-) 1 Increase Volume key (+) 2 Indicator light Speaker Note: ● For first time use, make sure to fully recharge the Headset battery. 4. Charging the Headset HCB86 comes with a Lithium Polymer battery built-in.
1. Plug the travel charger into the power socket. 2. Plug the end of the travel charger into the power interface adapter of the Headset. 3. While charging, the indicator will turn red; when charging is completed, the red indicator will shut off or flashes red. Note: Charging time is around 90~120 minutes. ● For first time use, make sure to fully recharge the Headset up to 4 hours. After a long time of not using it (around one month), while recharging, it takes a while for the indicator to turn red.
will turn on after the indicator flashes the blue light 3 times. 2. To turn the power off, press and hold the function button for 2~3 seconds until you see the red indicator flash 3 times. Note: ● While turning the Headset on, you will hear the “Du Du” sound from the receiver. The blue indicator light will flash 5 times, then 2 times, and after repeating this for 5 times, the indicator will flash the blue light every 3 seconds to come into a standby mode.
start the Bluetooth new device searching function. Please follow the instructions of your mobile phone to proceed the operation. 4. When your mobile phone is in the stage of searching a new Bluetooth device, it will find HCB86. 5. Please choose and confirm HCB86. 6. Key in the Headset Password “0000” and press YES. If the pairing is successful, the indicator turns to flash the blue light only. For some mobile phones, after pairing you may have to select and confirm HCB86 again to start the connection.
● Even though the following situations happen, the paired devices remain pairing. - The power for one of the devices is off. - The service for one of the devices is off. - One of the devices is re-switched on. 7. Pair with 2 Bluetooth phones After achievement of pairing 1st Bluetooth phone, please repeat the pairing process, No.6 “Pairing the Headset”, to pair with 2nd Bluetooth phone 8. Operating method: While answering the call from 1st phone, there comes another call from 2nd phone 1.
Note: Only one call can be answered by Bluetooth headset at a time. Remark :Bluetooth headset doesn’t with holding call function while you answer the other call. 9. Pair Wearing the Headset 1. According to your preference, adjust the headset on your left or right ear. 2.
10. Answering the calls 1. While there is a call coming, wait until you hear the ringing from your Headset receiver to press the function button to answer the call. 2. If the mobile phone is ringing first, wait until the Headset is ringing, then press the function button. 3. While answering the calls, the blue indicator light flashes 4 times each second. 4. If the mobile phone is ringing and your Headset is off, turn on your Headset first, then press the function button to answer the call. 5.
. Ending calls 1. When the conversation is over, press the function button to end calls. 2. Wait until the other end hangs up the phone to end calls. 13. Voice dialing 1. If your mobile phone supports the voice dialing function, you can use this function with your Headset too. 2. Under the standby or connecting mode, press the function button of the Headset and follow the mobile phone instructions to proceed with the voice dialing.
15. Transferring calls 1. When you are answering the call with the Headset, press the increase (+) volume key for 2~3 seconds until you hear one “Du” sound, then the call will be transferred to your mobile phone. 2. When you are answering the call with the mobile phone, press the function button of the mobile phone to transfer the call to your Headset. For some mobile phones, the phone LCD will show the transferring sign, some will not.
● To activate this function, please make sure the assigned telecommunications agent provides this service. ● To activate this function, please refer to the instructions of your mobile phones manual to make sure your phone program supports this function. 17. Holding Call 1 and answering Call 2 While you are answering Call 1 from your Headset, and having the interrupting call, you will hear the notifying “Du Du” sound.
Note: ● You will hear the “Du Du” sound while adjusting the volume up to the loudest or lowest. 19. Safety instruction 1. Read the Headset manual carefully and use the headset correctly by following the instructions. 2. Keep the Headset away from children, avoid children from swallowing it accidentally. 3. Do not use the cleaning liquid or spray to clean the Headset. 4. Do not clean the Headset while charging it. 5. Do not disassemble the Headset. If you encounter a problem, contact the retailer shop.
Supporting Profile Headset & Handsfree Connection Peer to Peer Data Encryption 128 bits encrypted Power Capacity Rechargeable Li-Polymer Power Supply 5V DC, 100~240V AC adapter Operation Temperature -10 ~ 55 ℃ Facility Saving Temperature -20 ~ 60 ℃ Operation Moisture 10% ~ 90% (non-concrete status) Weight 9.0 g (battery included) Size 45.3x20.5x12.2 mm Safety Regulation CE, FCC, BQB 21. Excluding Problems 1.
few minutes. 4. You hear no sound coming from the Headset: - Make sure the Headset has been paired with the other Bluetooth device. - Make sure the Headset is on. - Make sure the distance between the Headset and the paired Bluetooth device is within 10 meters. - Make sure your mobile phone has a good signal. - Some Bluetooth mobile phones support only one Headset, if you pair it with more than one Headset, it may cause the other Headsets being cut off. 22.
use it outdoors. - Connect the travel charger with the correct power supply. - Avoid pulling the cable to take the travel charger off the socket, it may damage the travel charger. [Battery] - New battery: for first time use, please fully recharge the battery for 4 hours. - Only authorized and qualified personnel can do battery changing. - Under the normal usage, the rechargeable battery can be used for the long time. - The battery must be recharged within temperatures of -10 ℃ to 45℃.
Q : Can HCB86 work with any of the mobile phones? A : No, this Headset works only with Bluetooth mobile phones. Q : How far is the working distance between the Headset and the mobile phone? A : Since HCB86 is certificated by BQB, compliable with Bluetooth V2.1 + EDR, Class II, the longest working distance is 10 meters. But, this working distance may be shortened by the interference existed in the surroundings and due to the insufficient Bluetooth function of the mobile phone.
A : No. The paired devices remain paired regardless of turning the power off, reopening the devices or changing the battery. Q : Why is the voice from the Headset not clear? A : It may be the following two reasons: (1) Your location has a bad signal, please move to a location with a better signal. (2) The working range between the Headset and the mobile phone has been exceeded.
Q : Why could the voice dialing function of the Headset not be switched on? A : (1) Please re-record the voice tag. (2) Some mobile phones do not support the voice dialing function. Please refer to the manual of your mobile phone. 24. Declaration of Conformity FCC (FCC ID: RL9-HCB86): HCB86 is FCC certificated as this device complies with part 15 of the FCC rules. It is built with new housing, extended from HCB86. European CE: HCB86 has been manufactured in accordance with the European R& TTE directive.
the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ence that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
