Bluetooth Headset User Guide HCT05
Index 1. Notice before using 2. Package List 3. Product Introduction 4. Charging the Headset 5. Power On/ Off 6. Pairing the Headset (or any Bluetooth Device) 7. Wearing the Headset 8. Answering calls 9. Refusing calls 10. Ending calls 11. Voice Dialing 12. Redialing 13. Transferring calls 14. Adjusting the Volume 15. Safety Instruction 16. Specifications 17. Excluding Problems 18. Storage of the Headset 19. Q & A 20.
1. Notice before using Thank you for purchasing our Bluetooth Headset HCT05. First of all, please check to find everything in your package and carefully study the user guide to know the function details. HCT05 is developed by the innovative Bluetooth wireless technology, enabled to connect the Bluetooth mobile phone designed with Audio Gateway (HCB18/ HCB21), PDA, desktop and notebook with the USB Bluetooth Dongle plugged-in, etc.
3. Product Introduction Function (Answering/ Ending/ On/ Off) Button 3 LED (Indicator) Light Receiver (Speaker) Microphone Power Interface adapter (charging) Ear Hook Decrease Volume key (-) 1 Increase Volume key (+) 2 Switch Button Indicator light Speaker Note: ● For first time use, make sure to fully recharge the Headset battery. 4. Charging the Headset HCT05 comes with a Lithium Polymer battery built-in.
1. Plug the travel charger into the power socket. 2. Plug the end of the travel charger into the power interface adapter of the Headset. 3. While charging, the indicator will turn red; when charging is completed, the indicator will shut off or flashes blue. Note: Charging time is around 90~120 minutes. ● For first time use, make sure to fully recharge the Headset up to 4 hours. After a long time of not using it (around one month), while recharging, it takes a while for the indicator to turn red.
Will turn on after the blue indicator flashes. 2. To turn the power off, press and hold the function button for 5 seconds until you see the red indicator flash 1 times.. Note: ● While turning the Headset on, you will hear one “Du Du” sound from the receiver. The blue indicator light will flash 1 time, then the red indicator light will flash 1 time, and after these, the blue indicator light will repeating flash to come into a standby mode.
start the Bluetooth new device searching function. Please follow the instructions of your mobile phone to proceed the operation. 4. When your mobile phone is in the stage of searching a new Bluetooth device, it will find HCT05. 5. Please choose and confirm HCT05. 6. Key in the Headset Password “0000” and press YES. If the pairing is successful,the indicator turns to flash the blue light and red light.
● Even though the following situations happen, the paired devices remain pairing. - The power for one of the devices is off. - The service for one of the devices is off. - One of the devices is re-switched on. 7. Wearing the Headset 1. According to your preference, adjust the headset on your left or right ear. 2.
8. Answering the calls 1. While there is a call coming, wait until you hear the ringing from your Headset receiver to press the function button to answer the call. 2. If the mobile phone is ringing first, wait until the Headset is ringing, then press the function button. 3. While answering the calls, the blue indicator light flashes 4 times each second. 4. If the mobile phone is ringing and your Headset is off, turn on your Headset first, then press the function button to answer the call. 5.
10. Ending calls 1. When the conversation is over, press the function button until hear the “ Bi Bi” sound to end calls. 2. Wait until the other end hangs up the phone to end calls. 11. Voice dialing 1. If your mobile phone supports the voice dialing function, you can use this function with your Headset too. 2. Under the standby or connecting mode, press the function button of the Headset and hold 2~3 seconds until hear the “Bi” sound follow the mobile phone instructions to proceed with the voice dialing.
13. Transferring calls 1. When you are answering the call with the Headset, press the increase (+) and the decrease (-) volume key for 1 time and you will hear one “Du” sound, then the call will be transferred to your mobile phone. 2. When you are answering the call with the mobile phone, press the increase (+) and the decrease (-) volume key for 1 time until you hear on “Du” sound to transfer the call to your Headset. For some mobile phones, the phone LCD will show the transferring sign, some will not.
15. Safety instruction 1. Read the Headset manual carefully and use the headset correctly by following the instructions. 2. Keep the Headset away from children, avoid children from swallowing it accidentally. 3. Do not use the cleaning liquid or spray to clean the Headset. 4. Do not clean the Headset while charging it. 5. Do not disassemble the Headset. If you encounter a problem, contact the retailer shop. ● Urgent handling -If you enconter a problem, turn the Headset off first.
Connection Peer to Peer Data Encryption 128 bits encrypted Power Capacity Rechargeable Li-Polymer Power Supply 5V DC, 100~240V AC adapter Operation Temperature -10 ~ 55 ℃ Facility Saving Temperature -20 ~ 60 ℃ Operation Moisture 10% ~ 90% (non-concrete status) Weight 9.5 g (battery included) Size 41x21x12.5 mm Safety Regulation CE, FCC, BQB 17. Excluding Problems 1. The Headset flashes the red indicator light: The battery is low, please recharge your Headset. 2.
4. You hear no sound coming from the Headset: - Make sure the Headset has been paired with the other Bluetooth device. - Make sure the Headset is on. - Make sure the distance between the Headset and the paired Bluetooth device is within 10 meters. - Make sure your mobile phone has a good signal. - Some Bluetooth mobile phones support only one Headset, if you pair it with more than one Headset, it may cause the other Headsets being cut off. 18.
- Connect the travel charger with the correct power supply. - Avoid pulling the cable to take the travel charger off the socket, it may damage the travel charger. [Battery] - New battery: for first time use, please fully recharge the battery for 4 hours. - Only authorized and qualified personnel can do battery changing. - Under the normal usage, the rechargeable battery can be used for the long time. - The battery must be recharged within temperatures of -10 ℃ to 45℃.
Q : Can HCT05 work with any of the mobile phones? A : No, this Headset works only with Bluetooth mobile phones. Q : How far is the working distance between the Headset and the mobile phone? A : Since HCT05 is certificated by BQB, compliable with Bluetooth V2.0, Class II, the longest working distance is 10 meters. But, this working distance may be shortened by the interference existed in the surroundings and due to the insufficient Bluetooth function of the mobile phone.
power off, reopening the devices or changing the battery. Q : Why is the voice from the Headset not clear? A : It may be the following two reasons: (1) Your location has a bad signal, please move to a location with a better signal. (2) The working range between the Headset and the mobile phone has been exceeded. Please make sure the Headset and mobile phone are within the working range of 10 meters and there is no obvious interference between.
switched on? A : (1) Please re-record the voice tag. (2) Some mobile phones do not support the voice dialing function. Please refer to the manual of your mobile phone. 20. Declaration of Conformity FCC (FCC ID: RL9-HC888): HCT05 is FCC certificated as this device complies with part 15 of the FCC rules. It is built with new housing, extended from HCB88. European CE: HCT05 has been manufactured in accordance with the European R& TTE directive.
the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
2) this device must accept any interference, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
