Product Manual

3a. With pump handle all the way down
and in the locked position (A),
turn to left (B) and lift out the pump (C)
Here’s Fill Your Sprayer
3
Before lling, be sure to read, understand and follow exactly the
label instructions on spray material container!
4a.
Unlock pump handle by pushing down
and turning handle. Do not unscrew pump cap
or remove pump.
Here’s how to pressurize (pump up) your sprayer
4
4b. Using the handle, pump up and
down. The more you pump, the more
pressure you will build up inside the
tank. When it becomes
difficult to pump, your
tank has reached
maximum pressure.
Do not stand with your
head over the pump.
NOTE:
• Use low pressure
(fewer strokes) for a
coarse spray
• Use high pressure
(more strokes) for a fine
mist or a long-reaching stream.
3b. Pour measured amount of
spray material into the open tank.
Follow label directions on spray
material container for amount
to use.
NOTE: Do not try to remove pump
by unscrewing pump cap. Doing
so will cause pump cylinder to
stay inside the tank and you will
not be able to fill it.
3c. Add water as directed.
Don’t fill beyond the MAX FILL line.
Replace pump and turn (clockwise) into place,
turning only hard
enough to seal.
4c. If using a PumpLess
™
Sprayer
1. Seal the pump. Run water through garden
hose to remove excess air. Turn off water. Thread
connector onto hose.
2. Push connector onto red
adapter on tank. Turn on water
and fill to
“MAX FILL” line on tank; shut
water off. Pull back collar on
the quickcoupler to remove
it from the sprayer. The air
trapped inside the tank has been
compressed by the water and
you are ready to spray.
NOTE: If you release the pressure
before using all the spray material, use the
conventional method 4b to repressurize sprayer.
Here’s How to Spray
5
5a. For sprayers with metal Roto-valve™ shut-off
Squeeze handle to spray. Release Handle to Stop
5b. For sprayers with poly shut-off valve
Push to spray
Pull back button to stop
5c. Identify Spray Patterns
COARSE
FINE MIST
FAN
5d. Adjust the Nozzle
Cone/stream nozzle
Tighten nozzle for fine mist
Fan nozzle
Loosen nozzle one full turn
for fan spray
Cone/Stream nozzle
Loosen nozzle one full turn
for coarse or long range
NOTE:
If you tighten the fan nozzle all the way down,
the spray may stop completely.
NOTE: If using a PumpLess
™
Sprayer, follow steps 3a and 3b. Replace pump without filling tank with water.
3