Owners manual
Topside Controls
Programming the Water Temperature Adjustment Allowance
e LED will display “Adj”. Use the “UP” arrow button to
raise the temperature allowance. Use the “DOWN” arrow
button to decrease the water temperature allowance.
In this example, the manufacturer’s recommended
settings are displayed. is setting will maintain the pre-
programmed water temperature and will maintain the programmed settings of
+/- 3°F before automatically heating the water. e manufacturer recommended
and factory settings will allow the water temperature to fall 3°F before the
heater automatically turns on to begin heating the water and will automatically
stop heating the water when the temperature is no more than 3°F above the set
temperature. With these settings, if your water temperature is set to 99°F, the
heater will automatically turn on when the water temperature falls to 96°F and
will automatically turn o when the water temperature reaches no more than
102°F.
Press the “M” button to move to the next parameter.
e cycle will rotate back to the ashing “rtc”. If you are satised with the
changes, do not press any buttons and allow the spa to exit programming mode.
When the spa has exited programming mode, the ashing “rtc” will be replaced
by the water temperature on the LED display.
W , “OFF” GFCI.
On occasion, error codes appear when there is not a problem with the spa, but to
indicate the spa needs the opportunity to reset. Aer severe weather, which may
include power surges that you do not notice, your spa may display an error code.
You should try resetting your spa before calling technical support to report a
problem. Allowing the spa to reset will oen solve the problem. To reset your
spa, manually power “OFF” the GFCI, wait 40 minutes and manually turn the
GFCI “ON”.
ere is a battery in the spa controls which allows the spa to hold all of the
program settings while the power is disconnected. It will not power the spa.
However, during prolonged periods of power outages, the water in the spa may
freeze and damage the spa. If you experience prolonged periods without power,
please call technical support at 877-722-4097 for instructions.
28
Adj
-3F
Std