User Manual

Rev 1.1 1/17
o “SET >>CAM” : Menu
 Move Joystick “left” and “right” or simply type camera ID to
select camera to configure.
 Press “Enter” key to confirm the choice.
 Move Joystick “up” and “down” to choose between setting
either the control protocol or baud rate settings.
 Move Joystick “left” and “right” to select the desired
control protocol or baud rate (to match that of camera).
 Repeat for all camera IDs required.
 Press “Esc” to return to previous menu level.
o “SET >>SYS” : Menu
 Move Joystick “left” and “right” to select system parameter
to configure.
 Press “Enter” key to confirm the choice.
 1(EDIT PW)
 OLD PW: Using “Number” keys, enter the current
password (default = “8888”). Press “Enter” key to
confirm.
 NEW PW: Using “Number” keys, enter the desired
password (4 numeric keys) Press “Enter” key to
confirm.
 AGAIN PW: Using “Number” keys, re-enter the desired
password (4 numeric keys) Press “Enter” key to
confirm.
 2(FACTORY)
 SURE?: Press “Enter” key to confirm.
 3(LOAD ISP)
 Press “Enter” key to confirm.
 SURE?: Press “Enter” key to confirm.
 4(SOUND)
 Move Joystick “left” and “right” to turn key beep ON
or OFF.
 Press “Enter” key to confirm.
 5(KB ID)
 KB ID: Using “Number” keys, enter the desired ID.
Press “Enter” key to confirm.
 6(LOCK SET)
 Move Joystick “left” and “right” to turn KB lock ON or
OFF. Press “Enter” key to confirm.
 LOCK PW: Using “Number” keys, enter the desired