User Manual

10
4. Open the binding mode (this step is only needed when bind-
ing for the first time or switching to a different transmitter. Must
be done manually).
1) Go to APP settings - transmitter, transmitter connection
method: Leas
2) Select "Set the Connection Between the Transmitter and the
Aircraft" to search for the aircraft.
3) Short press the power button of the aircraft 3 times to enter
binding mode.
4) Select the detected aircraft and establish a connection.
Tips：
① The binding process is completed in the factory. Generally, the
user only needs to perform the first 3 steps.
② After the aircraft entered binding mode, the 4 LED and the
video LED (by the TF card slot) will turn into flashing green
lights. After the binding is completed, the LED will turn into solid
green.
③ During binding, please keep the distance between the aircraft
and the transmitter less than 1 meter.
Connect the Aircraft
HUBSAN_ZINO PRO_XXXXXX
Connect
Refresh
Tips:
1. Short press the power of the aircraft 3
times to enter the aircraft re-code mode;
2. Please confirm mobile device and
remote control are connected properly
before clicking the refresh button to
refresh the list of aircraft;
3. Select the scanned drone and establish
a connection.
Control
Remote
Controller
Controls
Transmitter connection
Bluetooth
Leas
Transmitter firmware version
Transmitter hardware version
Set up transmitter connection to aircraft
Transmitter model