User Manual

09
3.2 Main Interface Guide
3.3 Pairing the Aircraft
(1) Long press the power button on the aircraft to power it on.
(2) Long press the transmitter power button to power it on. Use
the adapter cable to connect the transmitter to your mobile
device.
(Note: This interface is the interface in map mode.)
FPV
(Video)
signal
Remote
Control
Signal
Aircraft
GPS
Signal
Aircraft
Power /
Battery
Level
Home
Page
Flight
Status
Motor
Status
Settings
45.877503 , -106.123984
45.877503 , -106.123984，65m
Pitch 35° Yaw 25°Roll 45°
SPEED 0.0M/S
H: 0.0m D: 0.0m
0 50
Flight Mode
Altitude Distance Pitch Roll YawTransmitter GPS
Aircraft SpeedAircraft GPS
Auto Takeoff / Auto RTH
Headless On / Off
Map Display Mode
View Aircraft
Location
Map Calibration
E: 0%
T: 0% R: 0%
A: 0%
Not connected
Before Pairing
Not connected
N00.0000000,E000.0000000
45.877503 , -106.123984，65m
Pi tch 0° Yaw 0°Ro ll 0°
Speed 0.0m / s
H: 0.0m D: 0.0m
T: 0%
E: 0%
R: 0%
A: 0%
After Pairing
Connected
N00.0000000,E000.0000000
45.877503 , -106.123984，65m
Pi tch 0° Yaw 0°Ro ll 0°
Speed 0.0m / s
H: 0.0m D: 0.0m
T: 0%
E: 0%
R: 0%
A: 0%